熱重分析測試標準如下：

ANSI/ASTM D2288-2001 增塑劑受熱重量損耗測試方法(X-15-373-1) Test Method for Weight Loss of Plasticizers on Heating (X-15-373-1) (08.02)

ANSI/ASTM D6375-2009 用熱重分析儀(TGA)測定潤滑油蒸發損耗的試驗方法(Noack法) Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)

ASTM D6382-1999(2005) 屋頂和防水屋頂膜材料的熱重力和動態機械分析的標準操作規程 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

ASTM E2402-2005 熱重分析儀的質量損耗和剩余量測量驗證的標準試驗方法 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

ASTM E2551-2007 和熱重分析儀一起使用的濕度發生器濕度校正(或構型)的標準試驗方法 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

ASTM E2550-2007 熱重分析法測定熱穩定性的標準試驗方法 Standard Test Method for Thermal Stability by Thermogravimetry

ASTM E1641-2007 用熱重分析法的分解動力學用標準試驗方法 Standard Test Method for Decomposition Kinetics by Thermogravimetry

ASTM E2043-1999(2006) 熱重分析法測量農業輔助劑溶液中不揮發物質的標準試驗方法 Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry

BS EN 60811-4-1-2004 電纜和光纜的絕緣和護套材料.通用試驗方法.聚丙烯和聚丙烯化合物專用方法.抗環境應力致裂.熔化流動指數測量 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope

BS ISO 12989***** 鋁生產用碳素材料.焙燒陽極和側壁塊.空氣反應性的測定.熱重分析法 Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Thermogravimetric method

BS EN ISO 11358-1997 塑料.聚合物的熱重分析法(TG).一般原理 Plastics - Thermogravimetry (TG) of polymers - General principles

BS ISO 11358-*****塑料.高聚物的熱重分析法(TG).活化能測定 Plastics - Thermographimetry (TG) of polymers - Determination of activation energy

BS ISO 21870-2005 橡膠配合劑.炭黑.熱重分析法測定加熱的高溫?fù)p失 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry

BS ISO 9924-3-2009 橡膠和橡膠產品.利用熱重量分析法測定硫化橡膠和混煉膠料的成分.提取后的烴類橡膠,鹵化橡膠和聚硅氧烷橡膠 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction

DIN EN ISO 11358-1997 塑料.聚合物的熱重測定.一般原理 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997

IEC 60811-4-1-2004 電纜和光纜絕緣和護套材料的通用試驗方法.第4-1部分:聚乙烯和聚丙烯化合物專用方法.抗環境應力致裂.熔化流 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope

ISO 11358*****塑料.高聚物的熱重分析法(TG).第2部分:活化能測定 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy

ISO 11358-1997 塑料 高聚物的熱重分析法(TG) 一般原則 Plastics - Thermogravimetry (TG) of polymers - General principles

ISO 12989-****** 鋁生產用碳素材料.焙燒陽極和部碳?jí)K.空氣反應性的測定.第2部分:熱重分析法 Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method

ISO 21870-2005 橡膠配合劑.炭黑.熱重分析法測定加熱下的高溫?fù)p失 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry

ISO 9924-3-2009 橡膠和橡膠制品.用熱重量分析法測定硫化和未硫化化合物的成分.第3部分:烴類橡膠、鹵化橡膠和萃取后聚硅醚橡 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction

JIS K7120-1987 塑料熱重量分析法的測試方法 Testing methods of plastics by thermogravimetry

JIS K6226-2-2003 橡膠和橡膠制品.用熱重量分析法測定硫化橡膠和未硫化化合物的成分.第2部分:丙烯腈丁二烯和鹵丁基橡膠 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers

JIS K6226-1-2003 橡膠和橡膠制品.用熱重分析法測定硫化和未硫化化合物的成分.第1部分:丁二烯、乙烯-丙烯共聚物和三聚物、異 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

塑道學苑通過不斷創新，努力成為火安全材料領域一站式服務品牌領導者。充分融合移動互聯新技術的優勢，堅持內容價值性導向的原則，致力于帶給行業人嶄新的知識學習體驗、專業的產品技術服務、全面的產業思維提升，讓更多業內人士專業知識儲備獲得提高，產品技術問題獲得解決，企業核心競爭力獲得提升。迄今，塑道學苑已推出內容傳播，交流培訓，材料檢測三大品牌服務。咨詢熱線：0512-62982691

更多信息請?jiān)L問塑道學苑官方網站：www.023114.net